Download Wi-OLC print version brochure of this page  
System Overview - Individual lights are controlled by electronic dusk to dawn photocontrol nodes. The nodes also include 2-way radio communication. The nodes form a mesh communications network. A base station radio located near an outside wall or window is connected to a PC. The base station radio sends radio signals to override the dusk to dawn photocontrol operation.

Installation - The nodes are installed just like regular twistlock photocontrols. Serial numbers and location are noted. A disk is provided to easily load user friendly software on any standard PC. The base station radio is connected to the PC with a standard USB connection. Serial numbers and location/groupings are loaded into the software data base.

Lighting Control - Settings for On / Off operation of the entire lighting system, lighting groups or individual lights can be programmed. Settings are available for 24 hour, 7 day or 365 day operation. An “All On” feature can be used to check lamp / fixture operation during daytime hours.

Cost & Convenience Benefits – The Wi-OLC system eliminates the excessive construction cost of wiring timers and contactors. Holiday, special events and seasonal operations are easily programmed. Individual or blocks of fixtures can be turned off when not needed conserving energy and extending lamp life. Maintenance can be performed during the daytime.

> Download Wi-OLC Brochure for print

Wi-OLC System Specifications


Wi-OLC Photocontrol (Node) General Description:
The Wireless Outdoor Lighting Control (Wi-OLC) installs in standard locking type, three-wire NEMA photocontrol receptacles. The photocontrols are controlled from the user configured schedule in the Control Panel Software provided.

Specifications
Operating Voltage: 105-305 VAC, 50/60 Hz
Load Rating: 1000 Watt tungsten, 1800 VA
Life at rated load: 5,000 Operations (13.7 Years)
Power Consumption: 1.0 watts average @ 120 VAC
Transmit Power: 100 MW
Receive Sensitivity: -95 dBm
Data Rate: 250 kbps
Standard Surge Protections:
320 Joule (13,000 Amps) MOV
Operating Light Levels:
1.5 fc +/- 0.1 fc.
1:1.5 Average turn-on to turn-off ratio
Photosensor:
Encapsulated phototransistor (upward facing)
Dielectric Strength:
2500 Volts between any current carrying parts
Ambient Temperature Range:
-40°C to +70°C (-40°F to + 158°F)
Moisture Resistance: 95 % RH
WiOLC Lighting System Base Station Dongle

Wi-OLC Base Station General Description:
The Base Station connects to a standard personal computer via USB or RS485 connection. The Base Station continuously monitors the wireless mesh
network integrity and sends control commands to the Photocontrols (nodes).

WiOLC Wireless Oudoor Lighting Control System Software

Control Panel Software
Minimum Requirements:
Windows based 2000, XP, or Vista PC (not provided), USB or RS485 communication port and CD-ROM drive.

Wi-OLC SYSTEM MODEL NUMBERS:

WI-124-BR Photocontrol Node - Smoky Brown
WI-124-GY Photocontrol Node - Smoky Gray
WS-82007
WS-82008		 Base Station
Base Station 2
Option includes Base Station, 120VAC Power Supply, USB Cable, RS485 Port

For special requirements such as different turn on/off light level consult factory.